On many lakes across the U.S. and Canada you will find docks that are installed in the Spring and removed within the Fall. Stationary docks that are supported on the bottom of the lake on poles generally come apart in sections which are fairly light and can be carried out by hand. Sometimes large plastic wheels are permanently attached to the bottom of the dock poles. Often the fixed dock is light enough and rigid enough that a 30′ long section can be rolled right out of the lake and stored on the beach for the winter.
Floating docks typically use Inflatable Floating Platform and they are either made entirely of polyethylene, or have a wood, aluminum, or composite deck that sits on the top of the plastic floats. Floating docks weigh considerably more per foot than fixed docks. This excess weight causes it to be more challenging to create a long rigid structure that is light enough to be done by hand. Often the longest floating dock sections are restricted to about 10 feet. For long docks, the ten foot sections are connected with flexible connectors. These docks are usually removed by taking the sections apart and hand carrying them from the water, one 10 foot section at a time. In case you have an effortless beach, you could possibly drag the fully assembled dock up the beach with the ATV or SUV. Sometimes people will use PVC pipe as rollers under the dock therefore the dock lacks to drag on the sand.
There are manufactures now making floating docks that can have a single rigid section that is up to 32 feet long. These docks are made of structural aluminum bolted together to make a 24″ tall truss running both length and width of the dock. Polyethylene floats are caged within the truss system and a lot common dock materials can be used as the deck. These truss type structures are light enough and robust enough to permit wheels to be mounted underneath the dock. In the event the dock is meant to be rolled up the beach, polyethylene wheels can be mounted similarly to the people used on stationary docks. When the shoreline is too steep or it is far from convenient to keep the dock along the shore, a highway rated axle, wheels, and tires can be installed. The axle is galvanized and the bearings are usually protected having a military technology that is designed to maintain positive air pressure within the bearing cavity for starters year of Drop Stitch Fabric. A square or rectangular aluminum tube can be mounted under one end of the dock. This tube behaves as a receiver for any 6′ long trailer tongue which will insert about 2′ and after that pin into place. You will find a trailer coupler on the extended end of the tongue that was created to connect to a trailer hitch having a standard 2″ ball.
The dock may be towed across the water to some standard boat launch ramp where tongue is inserted in to the receiver turning the dock in to a floating trailer. A light duty truck or SUV backs along the launch ramp till the coupler could be floated on the trailer ball. The coupler is locked on and also the truck pulls the dock out from the launch ramp much like it absolutely was a boat on a trailer. The dock may be towed down the highway two miles or 200 miles. Temporary trailer lights may need to be installed depending on the distance and terrain traveled.
This new “Rolling Floating Dock” technologies have dramatically reduced the hassle of installing and removing floating docks. Especially benefited are those waterfront sites which are very steep and possess little if any beach. Floating Docks can be purchased which can be approximately 17′ wide but could be folded up inside the launch ramp parking lot to simply 8.5′ wide so no special highway permits gbpman needed. Some docks may also add a large second deck. Big docks that are easy to install and take off can replace with the beach that many lake front owners wish they had.
Some manufacturers may even license the dock as being a boat letting it be motored around the lake having an outboard and tiller handle. These docks become a safe, fun, and mobile platform for swimming and fishing. While technology is racing around us, it is nice to view that a number of that technology is giving us safe places to relax on Inflatable Drop Stitch with the minds comfortable understanding that the task of closing up for your winter is going to be simple and quick.